Description
The Ampere Audio AA-3.0 12″ is the most torture tested subwoofers in the Ampere Audio lineup. The Ampere Audio AA-3.0 12″ was designed for 2000w rms per driver. The lead wires are formed into the spider layers which further enhances durability and eliminates lead slap/breakage problems. The frame is cast aluminum with a sandblasted, powder coat finish. One of the thickest 3” coils on the motor reduces energy storage from inductance, with the side benefit of lowering distortion for “faster” response.
Ampere Audio AA-3.0 12″ D4 Technical Specs
View AllClose
Ampere Audio AA-3.0 12″ D4 Technical Specs
- 2000w RMS
- Triple stacked 1″ slugs
- 4 layer 3″ aluminum coil
- 3 Layer spider pack
- Sewn leads
- Pressed paper cone
- Butyl rubber surround
- D2 or D4
- RE (Ohms): 4 / 6.8
- FS (Hz): 37.75 / 37.64
- VAS (L): 16.46 / 16.2
- Qes: 0.743 / 0.804
- Qms: 3.237 / 3.941
- Qts: 0.604 / 0.668
- BL (NA): 20.1 / 25.3
- Mms (Grams): 313.583 / 320.579
- Cms (MM/N): 56.67 / 55.743
- Sens (dB @ 1w/1m): 82.6 / 82.2
- Sealed Enclosure: Not Recommended
- Ported Enclosure: 2.0 cu ft
- Recommended Tuning: 32Hz
- Recommended Port Area: 24 sq in
- Displacement: 0.21 cu ft
- Depth:
- Outside Diameter: 12.5
- Cut-Out: 11.125
1 Review
-
Ampere Audio AA-3.0 RVE V.4 12"
I originally wanted an Incriminator Death Penalty. Aaron talked me out of it. I had a Sundown but it needed more power than what I had. I am running this sub off a JP23 v1.5. This sub is great. But even better is Aaron and the crew there at SSA. I'm running on a clock thats almost out of time. I needed to get this sub and install it in the car I am leaving my son. And Aaron got it here for me. Thats the kind of people you want to deal with. Aaron, thank you.