Description
The Ampere Audio AA-3.0 18″ is the most torture tested subwoofers in the Ampere Audio lineup. The Ampere Audio AA-3.0 18″ was designed for 2000w rms per driver. The lead wires are formed into the spider layers which further enhances durability and eliminates lead slap/breakage problems. The frame is cast aluminum with a sandblasted, powder coat finish. One of the thickest 3” coils on the motor reduces energy storage from inductance, with the side benefit of lowering distortion for “faster” response.
Ampere Audio AA-3.0 18″ D4 Technical Specs
View AllClose
Ampere Audio AA-3.0 18″ D4 Technical Specs
- 2000w RMS
- Triple stacked 1″ slugs
- 4 layer 3″ aluminum coil
- 3 Layer spider pack
- Sewn leads
- Pressed paper cone
- Butyl rubber surround
- D2 or D4
- RE (Ohms): 4 / 6.8
- FS (Hz): 28.251 / 27.873
- VAS (L): 92.683 / 96.31
- Qes: 1.017 / 1.171
- Qms: 3.466 / 3.194
- Qts: 0.786 / 0.857
- BL (NA): 20.8 / 23.9
- Mms (Grams): 625.409 / 619.91
- Cms (MM/N): 50.746 / 52.732
- Sens (dB @ 1w/1m): 85 / 84.4
- Sealed Enclosure: Not Recommended
- Ported Enclosure: 5 cu ft
- Recommended Tuning: 32Hz
- Recommended Port Area: 24 sq in
- Displacement: 0.21 cu ft
- Depth: 15.1"
- Outside Diameter: 18.5"
- Cut-Out: 16.75"