Looking for a 4 Channel Amp with component 2 sets of our Midbass's and Tweeters? Look no further! Everything you'll need at one low price. Please select the impedance you'd like at the time of purchase.

What you'll get:

1 x SSA DM100.4

2 x SSA EVIL 1.25" Neo Tweeters (4 Ohm or 8 Ohm)

4 x SSA EVIL MidBass (4 Ohm or 8 Ohm)

SSA DM100.4 Amplifier

Introducing the all new SSA DM100.4 amplifier. An old school approach, with updated components, for the most discerning of ears. If your front stage is lacking warmth and clarity, its time to upgrade. Our first 4 channel amplifier in our high-end, sound quality, Class- A/B - Demon amplifier line. The SSA DM100.4 is the elite choice for that high end active front stage, premium passive components, and especially a sound quality sub (SSA Demon in a 3-way set up). Stellar looks to match the design and components. Don't let your speakers or your ears down, #levelup to the all new SSA DM100.4 amplifier.

• 100 Watts RMS X 4 @ 4 Ohm
• 350 Watts RMS X 2 @ 4 Ohm
• Fully active capable crossover network
• Bass Boost Feature for Channels 3/4 when being used for a subwoofer in 3-way set up
• Angled Terminals for show quality installations
• Full Complimentary low distortion Class AB design
• Tiffany Style RCA connectors
• Full Complimentary low distortion Class AB design
• Butterworth Crossover Filters
• The op amps featured are TI chips w/BB technology high performance audio grade IC's
• Docking Pads® to reduce vibration & extend the life the amplifier
• DC, Short Circuit, Thermal & Overload Protection, on board fusing
• Diagnostic LEDs

Specifications

• OUTPUT POWER @ 14.4V input
• RMS per channel at 4 Ohms: 100 W x 4 CH
• RMS per channel at 2 Ohms: 175 W x 4 CH
• RMS Bridged Mono at 4 Ohms: 350 W x 2 CH
• RMS Mono at 1 Ohm: N/A
• INPUT SENSITIVITY: 200mV - 6.0V
• FREQUENCY RESPONSE: 10Hz - 30KHz +/- 0.5dB
• THD: LESS THAN 0.01%
• S/N RATIO: > 97 dB
• CHANNEL SEPARATION: > 92 dB
• DAMPING FACTOR: @100Hz 4 ohm > 200
• CROSSOVER RANGE: CH 3&4, CH 1&2
• High Pass, 12dB/Octave: 15-500 Hz, 50-3K Hz
• Low Pass, 24dB/Octave: 50 - 500 Hz, 500 - 5K Hz
• Band Pa:ss N/A
• Variable Bass Boost: (0 to +12 dB bass boost at 45 Hz) –
• Wired remote bass control included: No
• Phase Shift (0 - 180 degrees): No
• Fusing: 3 x 35A
• Size: (L x W x H) in 17.7 x 8.9 x 2.2

SSA Evil6.5 Mid-bass woofer description

Nearly 2 years in the making, the first mid-bass speaker from SSA is here. Being this is an SSA speaker, elite performance at an affordable price was the ONLY option. Through numerous designs and prototypes, we developed a mid-bass speaker that is deserving of the SSA brand name. As seen by the long list of premium features, (copper coil, carbon fiber cone, shorting ring, Nomex spiders, Aluminum basket and former, solid pole piece, underhung motor) it shows we went the distance to make the SSA Evil6.5 a fantastic sound quality speaker that can take some power and will have strong output when called upon. The SSA Evil6.5 is at home in a well damped car door, or even a home audio tower / bookshelf. When you want top tier mid-bass performance and don't want to spend hundreds, the SSA Evil6.5 is the obvious choice.

SSA Evil6.5 Mid-bass woofer features:

• Sold Individually
• 125 watts rms
• Carbon Fiber cone for rigidity, low moving mass and smooth transient response
• Copper voice coil for warmth and power handling
• FEA optimized Underhung motor design for excellent sound quality
• Shorting ring to drastically reduce inductance
• Extended solid pole piece for increased motor strength
• Nomex spiders for long lasting performance and cone control
• Y30 High Energy Ferrite Magnet
• Large push terminals for ease of connection and larger speaker wire
• High excursion rubber surround
• Aluminum cast basket with multiple mounting holes for no frame resonance and great mounting flexibility
• Aluminum former for heat dissipation
• Phase plug
• SSA magnet boot to protect the motor
• Designed and engineered in the USA to be quite versatile for many applications, great in both car audio and home audio

SSA Evil6.5 Mid-bass woofer specs:

• 4 ohm or 8 ohm single voice coil option
• Frequency response 45hz - 4500hz
• Re: 3.3 ohm / 7.2 ohm
• Fs: 65.49hz
• Sd: .01474m2
• BL: 6.494 T
• Qms: 6.6
• Qes: 0.51
• Qts: 0.474
• SPL: 89.9 db 1W/1m
• Vas: 11.495L
• Cms: 372.51
• Mms: 15.854g
• Xmax: 6mm one-way

SSA Evil6.5 Mid-bass installation:

• 3.1" total depth
• 2.85" Mounting depth
• 5.7" cut out
• 6.5 lbs. each
• sealed box: 0.3 cubic foot - f3 = 97.7Hz - Qtc: 0.707
• ported box: 0.69 cubic foot - f3 = 51.82hz - 2" diameter / 0.9" long port

Our first dedicated tweeter is here, the SSA Evil1. Developed from the start, alongside the SSA Evil6.5’s, the all-new SSA Evil1 is meant for the discerning music fan that really cares about the quality of the music they are listening to. With a large silk dome and low Fs. the SSA Evil1 is very smooth and blends very well with the mid and mid-bass range. Using a sound transparent grill, you can be confident in the fact the tweeter will be safe for many years of excellent performance. Designed to be flexible for not only high-end car audio front stages, but premium bookshelf’s, and high-end home audio towers. In designing the SSA Evil1 we were able to pull off a large 28mm dome in a compact aluminum housing. If you are looking for shrill, piercing, PA-style high’s, this is not the tweeter for you. If you are looking for clarity and balance, at a reasonable price, don’t sleep on the new SSA Evil1.

SSA Evil1 Tweeter features:

• Sold in a matched pair
• 65 watts rms
• 28mm silk dome with large roll surround
• Aluminum faceplate and housing
• Sound Transparent protective grill
• Low Fs. for flexibility in both home and car audio applications
• Neo Motor with shallow rear non-resonant aluminum chamber
• SSA logo on mounting flange
• 65 watts RMS with supplied cap
• Designed and engineered in the USA

SSA Evil1 T/S Specs:

SSA Evil1 4ohm:

• Re: 3.6 ohms
• Fs.: 736.4 hz
• Qms.: 0.635
• Qes.: 1.05
• Qts.: 0.39
• SPL 1w/1m: 93

SSA Evil1 8ohm:

• Re: 6.2 ohms
• Fs.: 838.1 hz
• Qms.: 0.589
• Qes.: 1.62
• Qts.: 0.43
• SPL 1w/1m: 95

SSA Evil1 Tweeter installation:

• 21.5mm Mounting depth
• 48.5mm cut out
• 1 lbs. each
• 61.9 mm (2.44") diameter flange