SSA DM150.2 - 2 Channel Amplifier - 150w x 2 Ch or 500w x 1 Ch

(No reviews yet) Write a Review
SKU:
SSA-DM1502
Bulk Pricing:
Buy in bulk and save
On Sale
  • SSA DM150.2 - 2 Channel Amplifier - 150w x 2 Ch or 500w x 1 Ch | Condition: New | Category: Amplifiers
  • SSA DM150.2 - 2 Channel Amplifier - 150w x 2 Ch  or 500w x 1 Ch
  • SSA DM150.2 - 2 Channel Amplifier - 150w x 2 Ch  or 500w x 1 Ch
  • SSA DM150.2 - 2 Channel Amplifier - 150w x 2 Ch  or 500w x 1 Ch
  • SSA DM150.2 - 2 Channel Amplifier - 150w x 2 Ch  or 500w x 1 Ch
MSRP: $345.00
Now: $269.99
Was: $299.99
— You save $75.01

Description

SSA DM150.2 Amplifier


Introducing the all new SSA DM150.2 amplifier. An old school approach, with updated components, for the most discerning of ears. If your front stage is lacking warmth and clarity, its time to upgrade. Our first amplifier in our high-end, sound quality, Class- A/B - Demon amplifier line. The SSA DM150.2 is the elite choice for that high end active front stage, premium passive components, and especially a sound quality sub (SSA Demon). We've incorporated direct inputs for those competition installs that use an external DSP and want their amp to be a pure gain block. Stellar looks to match the design and components. Don't let your speakers or your ears down, #levelup to the all new SSA DM150.2 amplifier.

  • 150 Watts RMS X 2 @ 4 Ohm
  • 500 Watts RMS X 1 @ 4 Ohm
  • Angled Terminals for show quality installations
  • Full Complimentary low distortion Class AB design
  • Tiffany Style RCA connectorsFull Complimentary low distortion Class AB design
  • Butterworth Crossover Filters for premium level performance
  • An extra pair of input connectors for a direct input that will bypass the crossover so the amp can act as a gain block
  • The op amps featured are TI chips w/BB technology high performance audio grade IC's
  • Docking Pads® to reduce vibration & extend the life the amplifier
  • DC, Short Circuit, Thermal & Overload Protection, on board fusing
  • Diagnostic LEDs

Specifications

OUTPUT POWER @ 14.4V input
RMS per channel at 4 Ohms 150 W x 2 CH
RMS per channel at 2 Ohms 250 W x 2 CH
RMS Bridged Mono at 4 Ohms 500 W x 1 CH
RMS Mono at 1 Ohm N/A
INPUT SENSITIVITY 200mV - 6.0V
FREQUENCY RESPONSE 10Hz - 30KHz +/- 0.5dB
THD LESS THAN 0.01%
S/N RATIO > 103 dB
CHANNEL SEPARATION > 91 dB
DAMPING FACTOR @100Hz 4 ohm > 200
CROSSOVER RANGE
High Pass, 12dB/Octave 80-1.2K Hz
Low Pass, 24dB/Octave 10Hz - 250Hz
Subsonic N/A
Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) Yes
Phase Shift (0 - 180 degrees) No
Fusing 3 x 40A
Size (L x W x H) in 16.4 x 8.9 x 2.2
View AllClose

0 Reviews

View AllClose